Cruise仿真报错:ERROR M_162 : The left and right voltage Nets of DC/DC are identical解决办法
ERROR M_162 : The left and right voltage Nets of DC/DC are identical
ERROR M_162 : The left and right voltage Nets of DC/DC are identical
ERROR M_161 : Torque Converter: Speed Ratio >1 (whereas K-Factor >0)
ERROR M_160 : Torque Converter: K-Factor <= 0
WARNING M_159 : Function: Division by zero in Derivation
WARNING M_158 : Total Load in current Task is higher than Gross Weight of Vehicle
WARNING M_157 : Cold Start Correction is not everywhere activated
ERROR M_156 : Attempt to read KULI simulation time failed
ERROR M_155 : KULI: finish check failed
ERROR M_154 : KULI Iteration Run failed
ERROR M_153 : KULI: StartAnalysis failed
ERROR M_152 : KULI: Time step initialization failed
ERROR M_151 : KULI: Event interface activation failed
ERROR M_150 : KULI project Initialization failed
ERROR M_149 : Event interface initialization failed
ERROR M_148 : KULI COM interface initialization failed
ERROR M_147 : KULI COM interface initialization failed
ERROR M_146 : KULI COM interface initialization failed
ERROR M_145 : Two KULI components use the same file
ERROR M_144 : Release of a KULI-process failed
ERROR M_143 : Number of KULI-processes greater than 1024
WARNING M_142 : Unable to calculate stationary with an KULI-component
WARNING M_141 : Delay License not performed
ERROR M_140 : KULI: GetValue from COM input component failed
ERROR M_139 : KULI: SetValue in COM output component failed
WARNING M_138 : KULI COM input component does not exist
© Copyright 2012-2142 www.Avl-Cruise.com Some rights reserved. 皖ICP备15024617号-5