Cruise仿真报错:WARNING M_210 : Additional FC-factor in engine properties selected but in databus not con
WARNING M_210 : Additional FC-factor in engine properties selected but in databus not connected
WARNING M_210 : Additional FC-factor in engine properties selected but in databus not connected
WARNING M_209 : Additional fuel consumption in engine properties selected but in databus not connected
ERROR M_208 : Clutch Program: Data Bus Input 'Velocity' not connected
ERROR M_207 : Clutch Program: Data Bus Input 'Speed' not connected
ERROR M_206 : Clutch Control: Data Bus Input 'Velocity' not connected
ERROR M_205 : Clutch Control: Data Bus Input 'Speed' not connected
ERROR M_204 : Electric Machine: Data Bus Input 'Desired Torque' not connected
ERROR M_203 : Electric Machine: Data Bus Input 'Load Signal' not connected
ERROR M_202 : DRIVE component could not write result file
ERROR M_201 : DRIVE component: gear not connected
ERROR M_200 : DRIVE component: brake pedal not connected
ERROR M_199 : DRIVE component: engine temperature not connected
ERROR M_198 : DRIVE component: engine speed not connected
ERROR M_197 : DRIVE component: acceleration not connected
ERROR M_196 : DRIVE component: velocity not connected
ERROR M_195 : DRIVE component: load signal not connected
ERROR M_194 : DRIVE component: could not be started
ERROR M_193 : DRIVE DLL could not be loaded
ERROR M_192 : External Velocity selected, but not connected
WARNING M_191 : Torque control only allowed for simulation => switching to load signal control
ERROR M_190 : ASC not found; by using QS & 'without slip limited'
ERROR M_189 : Limit of fault time in cycle run is reached
WARNING M_188 : OnCancel-Event in KULI called more than 5000 times
ERROR M_187 : Losses as a function of temperature selected, but not connected on the databus. External temperature is set to 0oCelsius
WARNING M_186 : Excel File already opened. It will be overwritten by the new results
© Copyright 2012-2142 www.Avl-Cruise.com Some rights reserved. 皖ICP备15024617号-5